Eidoll Sales the  The new  energy Hi-pot current fuse,Bellow are the specification:

一、5*20mm Hi-pot specification as bellow:

1.MODEL  NUMBER  AND  SAFETY  CERTIFICATION

·

Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.
example:
5CH          1A     1000V                   1)  Part  Number
2)Rated  Current
1）           2）    3）                         3)Rated  Voltage
1-2 Rated Current  And  Voltage
Rated Current: 63mA~1
Rated  Voltage: 500V/600V/1000V AC/DC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic  Symbol+Rated Voltage
63mA~800mA : _mA500V/600V/1KV    1A~1:_A500V/600V/1KV
Trade mark:The Manufacture’s Logo+Part Number+Approvals
63mA~1:

Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm)

3-2Structure

4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.

5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.

6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Breaking capacity(Time Lag and Fast Acting)

b、Electrical characteristics

Time Lag（CCC/VDE）

Fast Acting

UL

c、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.

d、Approvals

7. ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.

8.SOLDERING PAAMETERS
8-1Wave Solder
Soldering Temperature:260±5℃
Soldering Time:4 Sec.Max.
8-2Manual Solder
Soldering Temperature: 350±5℃
Soldering Time: 3 Sec. Max.
OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.

二、 6.35*32mm the specification of Hi-pot current fuse as bellow:

635*32mm Hi-pot current fuse the specifications as below,：

1.MODEL  NUMBER  AND  SAFETY  CERTIFICATION

1-1 Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.

example:

6CFUP      10A    500V                    1)Part  Number

2)Rated  Current

1） 2） 3） 3)Rated  Voltage

1-2 Rated Current  And  Voltage

Rated Current: 63mA~30A

Rated  Voltage: 500V/600V AC/DC

1-3Marking

The fuse shall have the following marking:

Specification:Characteristic  Symbol+Rated Voltage

63mA~800mA : _mA250V/500V    1A~30A:_A250V/500V

Trade mark:The Manufacture’s Logo+Part Number+Approvals

63mA~30A:

Note:Size of the markings have not be specified.

2.SCOPE

Used in electronic equipment.

3.OUTLINE DRAWING AND STRUCTURE

3-1 Outline Drawing and Dimensions(Unit:mm）

3-2Structure

4.APPEARANCES AND CONFIGURATION

4-1Appearances:There shall no fragmentation and of remarkable blotch.

4-2Configuration:Axial Leaded Fuse.

5.PHYSICAL CHARACTERISTIC

5-1 Tensile test

Keep pulling the cap of the fuse with 10N at axial direction for 1 min.

6.ELECTRICAL CHARACTERISTICS

Pre-Arcing Time/Current Characteristic

a、Breaking capacity(Time Lag and Fast Acting)

b、Electrical characteristics

Fast Acting(refer to UL)

c、Temperature character

When 100% of rating the temperature rise doesn’t exceed 75℃.

d、Approvals

7.ENVIRONMENTAL SPECIFICATION

7-1 Operating Temperature: -5℃~60℃

7-2 Storage Conditions

Temperature: +10℃~60℃

On average, It can be stored below the relative humidity or 75% for 3 years.

Without dew, It can be kept under humidity of 95% for 30 days.

8.SOLDERING PAAMETERS

8-1Wave Solder

Soldering Temperature:260±5℃

Soldering Time:4 Sec.Max.

8-2Manual Solder

Soldering Temperature: 350±5℃

Soldering Time: 3 Sec. Max.

9.OTHER NOTICE IN USING

If heat shrink tubing was needed,the roast temperature and time should be refer to the following.

The temperature should be sel under 150℃,roast time:50s Max.

三、10*38mm the spefication of Hi-pot current as bellow:

1.MODEL  NUMBER  AND  SAFETY  CERTIFICATION

·       Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.

[example]:
10HCU      40A     500V                   1)Part  Number
2) Rated  Current
1）               2）      3）                     3)  Rated  Voltage
1-2 Rated Current  And  Voltage
Rated Current: 100mA~50A
Rated  Voltage:125V/250V~1000V AC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic  Symbol+Rated Voltage
100mA~800mA : _mA500V    1A~50A:_A500V
Trade mark:The Manufacture’s Logo+Part Number+Approvals

100mA~500A:

Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm)

3-2Structure

4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.
5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Electrical characteristics
Fast Acting

b、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.

7.ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.

8.OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.